The lifting basket for load transfer is suspended on the lifting suctions of all corners, with four hooks of the lifting rope. The maximum angle of the lifting tops can be 60°, and the minimum length of these is 3 m.
A lifting basket for the transfer of loads that can be lifted by any lift that has sufficient capacity. It can also be transported with a forklift, as it has built-in fork guides for this purpose.
carrying capacity 2000 kg distributed weight
mass of empty basket 1700 kg
outside dimensions 3 m x 2,5 m x 2,2 m
inside dimensions 2,8 m x 2,3 m x 1,8 m
material steel
Personal protection gear is required for safe work with the lfiting basket for cargo transfer:
– protective work wear
– safety work shoues with steel cap
– safety helmet
– protective work glasses
– safety gloves
The lifting basket for the transfer of cargo is a device intended for transporting various loads up to a total weight of 2000 kg. It is necessary to distribute the load over the load area of the basket, when it consists of smaller elements, and to stack it as low as possible (closer to the ground) so that it does not tip over during transport. It is necessary to attach it to the intakes, which are installed across the width of the lifting basket. Only this one has double-winged doors on both sides and a ramp for easier loading of cargo. The door of the basket is blocked by a motorized closer that blocks opening at the top and bottom. They also have a moment hinge that allows you to set the moment so that the door cannot open and close by itself without supervision. Rubber shock absorbers have also been added to absorb shocks during quick closing. Shock absorbers are also installed on the ramp when it is stowed in a vertical position. The ramp enables easier entry and loading of cargo. Open height measure for entering the basket each 1800 mm. The basket is not designed to transport people.
Carrying capacity of the basket is 2000 kg of mass distributed over the entire surface.
