The lift for circuit breakers is primarily intended for changing circuit breakers that are installed in cabinets.

It is designed as a manual hydraulic forklift with a double telescope. It is placed on four wheels, and movement is done by hand pushing or pulling. Lifting and lowering telescopes or loads are carried out via a hydraulic cylinder and via a system of load chains, and the hydraulics are controlled by a manual lever.

Modifications and finishing touches are carried out on the series-produced forklift, and individual assemblies are manufactured anew. Instead of classic lifting forks, a lifting console is installed, which is specially designed for lifting circuit breakers. The console is designed in such a way that it avoids the lights even when the circuit breakers in the upper row are raised, and the maximum height of the console is also adapted to this. The minimal rise of the console allows the operation of circuit breakers in the lower row or the placement of circuit breakers on the floor.

With the help of the hand spindle, the console can also be moved to the left/right, so that the handle can be more easily centred in the appropriate position. The handle for the circuit breakers itself can also be rotated. In this way, the circuit breaker can be manipulated by placing the lifter diagonally or laterally next to the cabinets. This also enables manipulation in narrow corridors between cabinets, or finding the best position of the elevator on uneven floors (stairs) next to cabinets.